' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

2536 - 'OPTIONAL' is deprecated as an argument herald in a CATCH declaration; consider changing it.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

0262 - A base character set in the concrete syntax part of an SGML Declaration is not used in the document character set part of the SGML Declaration.
0101 - A capacity keyword in the SGML Declaration must be followed by a capacity value (a number).
0177 - A CAPACITY limit for which a value has previously been specified in the SGML Declaration has been respecified.
2193 - A CASE clause of the current DO SELECT-TYPE block refers to a super-type of the head type.
2191 - A CASE clause of the current DO SELECT-TYPE block refers to a type that is not a sub-type of the head type.
0013 - A CDATA or RCDATA element must have a start tag. Therefore, it is inappropriate to specify an omissible start tag in its declaration.
0052 - A character assigned to LCNMCHAR must not be a LC Letter, UC Letter, Digit, RE, RS, SPACE or SEPCHAR, nor can it be a LCNMSTRT or UCNMSTRT.
0053 - A character assigned to LCNMSTRT must not be a LC Letter, UC Letter, Digit, RE, RS, SPACE or SEPCHAR.
0060 - A character assigned to UCNMCHAR must not be a LC Letter, UC Letter, Digit, RE, RS, SPACE or SEPCHAR, nor can it be a LCNMSTRT or UCNMSTRT.
0061 - A character assigned to UCNMSTRT cannot be a LC Letter, UC Letter, Digit, RE, RS, SPACE or SEPCHAR.
0065 - A character has been shunned more than once in the SGML Declaration.
0219 - A character in a parameter literal in the naming rules, general delimiter or short reference delimiter parameter of the SGML Declaration must be assigned to a unique character in the document character set.
0178 - A character in the document character set of the SGML Declaration must not be described more than once.
0066 - A character number must not be used more than once as the first character number in a pair of numbers in the character switches in the SGML Declaration.
0141 - A character other than a minimum data character must not occur in a minimum literal (i.e. in the SGML Declaration or in a public identifier).
0030 - A character reference to a data character cannot be allowed at the current point, and will be treated (together with any following data) as if it were part of an IGNORE marked section.
0140 - A character which is declared in the current concrete syntax to be non-SGML must not be used in the document unless entered using a character reference.
0304 - A character which is discouraged by the XML Specification should not be used in the document.
0275 - A character which is not allowed by the XML Specification can not be used in the document unless entered using a character reference.
2192 - A clause of the current DO SELECT-TYPE block refers to a type that has already been encountered.
0290 - A closing NET delimiter for an element does not occur immediately after the start tag, even though required to do so by the SGML Declaration (by the SHORTTAG option NETENABLE IMMEDNET).
2150 - A constant shelf cannot be declared as variable.
2152 - A constant shelf must be initialized when declared.
0004 - A content model must not be ambiguous.
2501 - A conversion-function may recurse infinitely.
2013 - A declaration was encountered in an invalid position.
0216 - A delimiter defined in the short reference delimiters parameter of the SGML Declaration should contain one or more characters.
0215 - A delimiter defined in the short reference delimiters parameter of the SGML Declaration should not contain one or more name start characters or digits.
2006 - A disallowed operation on a default counter was encountered.
6017 - A disallowed operation on a default shelf was attempted.
6018 - A disallowed operation on a default stream was attempted.
2036 - A disallowed operation on a default stream was encountered.
2090 - A disallowed operation on a non-modifiable shelf was encountered.
2053 - A disallowed operation on a non-modifiable stream argument was encountered.
2091 - A disallowed operation on a pre-defined shelf was encountered.
6146 - A disallowed stream operation was attempted.
0038 - A document type definition must not end inside a marked section.
0008 - A FIXED attribute value must be the same as its declared value.
0163 - A formal public identifier must include a public text class which is one of the 13 allowed values.
2068 - A format item that is currently not allowed was encountered.
0229 - A function character must not be assigned to a syntax reference character that is not mapped to a unique document character.
0173 - A function character number must not have already been assigned to another function.
2160 - A function has been declared as both overloaded and non-overloaded.
0081 - A general delimiter defined in the SGML Declaration should not have zero characters.
0185 - A general delimiter has been defined more than once in the SGML Declaration.
0079 - A general delimiter specified in the SGML Declaration must not contain only function characters.
0080 - A general delimiter specified in the SGML Declaration should not contain a name start character, a digit or a function character.
0017 - A general delimiter string must not be the same as a previously defined one that is allowed in the same context.
0018 - A general delimiter string must not be the same as a reference one that is allowed in the same context, unless that reference one is itself redefined.
0016 - A general delimiter string, together with a following delimiter that causes it to be recognized, must not be the same as a previously defined one that is allowed in the same context.
0184 - A general entity name has been declared more than once.
0240 - A general entity name used in SHORTREF declaration must be a declared general entity.
0082 - A general entity should not be declared after it has already been referenced using the default value.
2519 - A group has been defined but never used.
2109 - A group has been used but not defined.
0117 - A group in a content model must only use one kind of connector ("|", ", " or "&").
0119 - A group should not have a mixture of connectors, even though doing so is allowed (for other than content models).
0288 - A keyword in XML must be in upper case.
2087 - A limit has been exceeded in the OmniMark compiler.
2088 - A macro parameter that was already defined in the current macro was encountered again.
0050 - A marked section end must not occur when no marked section has started.
0051 - A marked section in a DTD must be IGNORE or INCLUDE.
0272 - A marked section in content must start with <![CDATA[ exactly.
0062 - A markup declaration has been encountered that is not allowed at the current point, but will be allowed through error recovery.
7901 - A MARKUP-ERROR rule is trying to write to the #MARKUP-PARSER stream.
3900 - A modifier is specified more than once in the current format item.
2185 - A module cannot export an ELSEWHERE definition for a function without also exporting an AS definition for that function.
0183 - A name must not be repeated in an exclusion or inclusion group.
0180 - A name must not be used in more than one attribute in an ATTLIST declaration.
0213 - A name must not be used more than once in the associated notation name list at the start of an attribute definition list declaration.
0212 - A name must not be used more than once in the element type list at the start of an attribute definition list declaration.
0210 - A name must not be used more than once in the element type list at the start of an element declaration.
0214 - A name must not be used more than once in the element type list in a short reference use (USEMAP) declaration in the DTD.
0211 - A name must not occurs more than once in a list of allowed values (name tokens or notation names) in an attribute definition.
0264 - A name specified as a default value for a name token group or NOTATION attribute in ATTLIST declaration for an element or a notation must be one of the attribute's allowed values.
0236 - A name specified as an attribute value for a name token group or NOTATION attribute in a start tag or ENTITY declaration must be one of the attribute's allowed values.
0238 - A name specified in a start tag must be declared as an element in the DTD.
0237 - A name specified in an end tag must be declared as an element in the DTD.
0255 - A named character reference's name must be one of those defined in the SGML Declaration.
6009 - A non-existent qualifier sequence was specified.
0246 - A notation for which attributes were declared must be defined.
0190 - A NOTATION must not be declared more than once.
0248 - A notation name used in an attribute value must be declared.
0247 - A notation name used in an ENTITY declaration must be declared.
0155 - A notation's ATTLIST must appear prior to the declaration of any external non-text entity with which that notation is associated if the ATTLIST includes a FIXED or default-valued attribute and if both SHORTTAG and OMITTAG are NO.
0154 - A notation's ATTLIST must appear prior to the declaration of any external non-text entity with which that notation is associated if the ATTLIST includes a REQUIRED attribute.
0011 - A number used in the capacity set parameter of the SGML Declaration cannot exceed the largest numeric value supported by the system.
0168 - A number used in the quantity set parameter in the SGML Declaration must not be larger than is allowed by the system.
0014 - A numeric character reference's value must not be larger than is allowed by the system in the context in which it occurs.
0146 - A parameter entity must not be referenced in the SGML Declaration.
0191 - A parameter entity name has been declared more than once.
0251 - A parameter entity reference must contain a name that has been previously declared as a parameter entity.
2518 - A pattern that cannot match any text was encountered.
2035 - A pattern that will cause an infinite loop was detected.
2515 - A performance issue was found.
0148 - A PI entity must not be referenced in a literal.
0149 - A PI entity must not be referenced in a markup declaration.
2176 - A predeclared shelf was never defined.
0301 - A processing instruction cannot be empty in XML.
2141 - A qualified declaration can only occur inside a module.
0192 - A QUANTITY limit value has previously been specified in the SGML Declaration.
0170 - A rank stem in a declaration must not used elsewhere as an element type or vice-versa.
0171 - A rank stem must not be used in a start tag in place of the generic identifier if RANK is NO.
0172 - A rank stem must not be used in an end tag in place of the generic identifier if RANK is NO.
0043 - A rank stem must not be used in an end tag when no element is open that has that stem.
0031 - A record end (RE) character cannot be allowed at the current point, and will be treated (together with any following data) as if it were part of an IGNORE marked section.
0032 - A record start (RS) character cannot be allowed at the current point, and will be treated (together with any following data) as if it were part of an IGNORE marked section.
2157 - A recursive module import has been attempted.
0197 - A reference general delimiter must not be made to contain only function characters by defining delimiter characters as function characters in the SGML Declaration.
0198 - A reference general delimiter should not contain a name start character, a digit or a function character, because of the way delimiter characters have been used in the SGML Declaration.
0287 - A reference is not allowed to an external entity.
0286 - A reference is not allowed to an external NDATA entity.
0289 - A reference is not allowed to an internal entity.
0019 - A reference short reference delimiter string must not be the same as a general delimiter that is allowed in the same context.
0202 - A reference short reference delimiter, used because SHORTREF SGMLREF is specified in the SGML Declaration, must only contain characters that are mapped to unique document characters.
0201 - A reference short reference delimiter, used because SHORTREF SGMLREF is specified in the SGML Declaration, should not contain one or more name start characters or digits.
0033 - A reference to a SUBDOC or unparsed (CDATA, SDATA, NDATA) entity cannot be allowed at the current point. The entity's text will not be processed.
0048 - A reference to an external non-SGML data entity, processing instruction entity or SUBDOC entity must not occur in an attribute value.
0049 - A reference to an external non-SGML data entity, processing instruction entity or SUBDOC entity must not occur in RCDATA content.
0279 - A reference's name must be one of those defined in the XML Specification, or of the form allowed for numeric character values.
6141 - A REFERENT written to a STRING SINK coroutine must come from an inner NESTED-REFERENTS scope.
6038 - A REFERENT written to this STREAM cannot be defined in an outer NESTED-REFERENTS scope.
2050 - A related modifier was already given for the current stream.
0204 - A replacement name in the reserved name use parameter of the SGML Declaration has already been used for the same reserved name.
2196 - A require declaration can only occur inside a non-shared module.
0153 - A required attribute should not be declared for an element previously declared with an omissible start tag.
0194 - A reserved name has been defined more than once in the SGML Declaration.
2156 - A rule disallowed in modules has been encountered.
2527 - A rule that has no effect in a module has been encountered.
0281 - A second DTD must not be specified in the input document.
0120 - A second DTD must not be specified in the SGML document.
6010 - A shelf cannot be COPY-CLEARed to itself.
2512 - A shelf is possibly not being used as intended.
2178 - A shelf literal can only appear inside of a scope.
0121 - A short reference delimiter in the SGML Declaration must not have more than one B sequence.
0252 - A short reference delimiter string in a SHORTREF declaration must be one of those allowed by the SGML Declaration.
0020 - A short reference delimiter string must not be the same as a previously defined one.
0188 - A SHORTREF map must not be declared more than once.
0142 - A shunned character must be identified as a non-SGML character, unless it is a significant SGML character.
0009 - A SPACE or SEPCHAR character must not be adjacent to a B sequence in a short reference delimiter.
0093 - A specified attribute value must conform to the declared type of the attribute.
0044 - A start tag for an excluded element must not be used.
0057 - A start tag is not allowed at the current point, but will be allowed through error recovery.
0268 - A start tag must end with ">" or "/>".
0109 - A start tag must not be omitted when OMITTAG is NO.
0056 - A start tag must not be used if the element is neither allowed by the current content model or by an inclusion.
0112 - A start tag or end tag should end with a TAGC (">").
0107 - A start tag with a start tag minimization of minus ("-") must not be omitted.
0291 - A start-tag is empty (i.e. "<>"), even though not allowed to be so by the SGML Declaration (by the SHORTTAG option STARTTAG, EMPTY NO).
0293 - A start-tag is ends with a NET delimiter (i.e. "/"), even though not allowed to be so by the SGML Declaration (by the SHORTTAG option STARTTAG, NETENABLE NO).
0292 - A start-tag is unclosed (i.e. ">" is missing), even though not allowed to be so by the SGML Declaration (by the SHORTTAG option STARTTAG, UNCLOSED NO).
3021 - A string continuation character ('_') is not followed by another string.
0203 - A string in the short reference delimiters parameter of the SGML Declaration is the same as a reference short reference delimiter and SGMLREF is specified.
2537 - A STRING-returning function should not output to the inherited #CURRENT-OUTPUT.
0193 - A syntax reference character must not be described more than once in the SGML Declaration.
0186 - A UCNMCHAR should not be assigned a LCNMCHAR that is already a LCNMCHAR or UCNMCHAR.
0195 - A UCNMCHAR should not be assigned to a character that is already a LCNMCHAR or UCNMCHAR.
0187 - A UCNMSTRT should not be assigned a LCNMSTRT that is already a LCNMSTRT or UCNMSTRT.
0196 - A UCNMSTRT should not be assigned to a character that is already a LCNMSTRT or UCNMSTRT.
5007 - A user-defined external subfunction returned failure:
2096 - A variable initially defined in a rule or match action's main pattern cannot be used in its main condition.
0298 - A warning has been encountered by the markup parser.
0012 - A zero value should not be specified for a capacity limit.
0169 - A zero value should not be specified for a quantity limit.
2529 - Action has no effect.
2540 - Action out of place.
0199 - All the characters in a reference general delimiter, used because no replacement for it is specified in the SGML Declaration, must be mapped to unique document characters.
0200 - All the characters in a reference reserved name, used because no replacement for it is specified in the general delimiters parameter of the SGML Declaration, must be mapped to unique document characters.
0003 - An added function name must not be one of RE, RS or SPACE.
0179 - An added function name must not have been already assigned to another added function in the SGML Declaration.
2500 - An ambiguous construct was detected.
 N/A - An argument exceeded maximum size of 2048.
2168 - An 'AS ...' clause is required in a USING prefix in this context.
2166 - An 'AS ...' clause is required in the header of a REPEAT OVER loop in this context.
0122 - An ATTLIST must only contain one ID attribute.
0123 - An ATTLIST must only contain one NOTATION attribute.
0208 - An attribute is specified in a start tag or element declaration using a name token group or notation value without a preceding attribute name and VI, and a value for that attribute has already been specified.
0271 - An attribute must be enclosed in double (") or single (') quotes.
0276 - An attribute must not be specified in a start tag more than once.
0207 - An attribute must not be specified in a start tag or ENTITY declaration more than once.
0137 - An attribute must not be specified in a start tag using a name token group or notation value without a preceding attribute name and VI or without surrounding literal delimiters, if SHORTTAG is NO.
0099 - An attribute name in a start tag or entity declaration must be followed by a VI ("=") and a value.
0270 - An attribute name must be followed by "=" and a quoted attribute value.
0175 - An attribute name must only be defined once in an ATTLIST declaration.
0130 - An attribute other than a CDATA attribute must not have a null literal ("") value or a value that does not have any name tokens in it.
0235 - An attribute specification found in a start tag or an entity declaration must have been declared for the associated element or notation.
0088 - An element is not allowed in the document instance because it does not appear in any accessible content model or it is completely excluded.
0022 - An element must not be declared EMPTY and have a CONREF attribute.
0182 - An element must not be declared more than once.
0174 - An element must not be required in its own content.
0258 - An element must not end before its content model is completely satisfied.
0138 - An element must not have empty content and a NOTATION attribute
0068 - An element name should be used in only one USEMAP in a DTD.
0239 - An element name specified in a USEMAP declaration, ATTLIST declaration or content model is not defined by an ELEMENT declaration.
0176 - An element or notation must have at most one ATTLIST.
0151 - An element that has been declared with EMPTY content must not later be declared with a CONREF attribute.
0152 - An element that has been declared with EMPTY content must not later be declared with a NOTATION attribute.
0205 - An element with a previously defined required attribute should not be declared to have an omissible start tag.
0118 - An element with mixed content should permit data characters ("#PCDATA") everywhere.
2186 - An ELSEWHERE definition for a function in one module cannot be satisfied by an AS definition in a different module.
0089 - An EMPTY element must have a start tag and must not have an end tag. Therefore, it is inappropriate to specify an omissible start tag or an inomissible end tag in its declaration.
0042 - An empty end tag must not be used when there are no opened elements.
0135 - An empty end tag was recognized even though SHORTTAG is NO, because the TAGC delimiter starts with a name start character.
0296 - An empty start tag for an element that requires content is not allowed.
0136 - An empty start tag was recognized even though SHORTTAG is NO, because the TAGC delimiter starts with a name start character.
0039 - An end tag for an element that is not open is not allowed.
0040 - An end tag has been encountered for some element other than the currently opened one and some opened element other than the currently opened one must be closed without its content being fully satisfied or with its inomissible end tag omitted.
0269 - An end tag must end with ">".
0104 - An end tag must not be omitted when OMITTAG is NO.
0069 - An end tag must not occur at the start of document instance.
0274 - An end tag of an opened element must not be omitted.
0103 - An end tag that has been declared inomissible ("-") must not be omitted.
0294 - An end-tag is empty (i.e. "&lt;/>"), even though not allowed to be so by the SGML Declaration (by the SHORTTAG option ENDTAG, EMPTY NO).
0295 - An end-tag is unclosed (i.e. ">" is missing), even though not allowed to be so by the SGML Declaration (by the SHORTTAG option ENDTAG, UNCLOSED NO).
0241 - An ENTITY attribute value must be a declared general entity unless there is a DEFAULT general entity.
0230 - An entity end must not end in a literal if it was referenced prior to the start of the literal.
0074 - An entity must not end in a processing instruction.
0070 - An entity must not end in an IGNORE marked section.
0075 - An entity must not end inside a comment.
0047 - An entity name declared as a default attribute value should be a non-SGML data entity or a SUBDOC entity.
0046 - An entity name used as a default attribute value, for an attribute that is not specified in the attribute's start tag, must be a non-SGML data entity or a SUBDOC entity.
0045 - An entity name used as an attribute value must be a non-SGML data entity or a SUBDOC entity.
0267 - An entity or character reference must end with a ";".
0234 - An entity referenced in a declaration, marked section or a literal must end in that same declaration, marked section or literal.
0006 - An entity that is already opened cannot be referenced.
0273 - An entity that was referenced prior to the start of a CDATA marked section must not end inside the marked section.
0072 - An entity that was referenced prior to the start of a CDATA or RCDATA element must not end inside the element's content.
0071 - An entity that was referenced prior to the start of a CDATA or RCDATA marked section must not end inside the marked section.
0232 - An entity that was referenced prior to the start of a declaration must not end in the declaration.
0231 - An entity that was referenced prior to the start of a group must not end in the group.
0297 - An error has been encountered by the markup parser.
6028 - An external text entity can't be resolved.
6144 - An external text entity is being resolved more than once.
0209 - An ID attribute must not have the same value as one previously used.
2533 - An INCLUDE file does not end in the same GROUP it began.
2199 - An incomplete markup parsing block was encountered.
2089 - An incomplete REPEAT action was encountered.
2075 - An incomplete rule was encountered.
 N/A - An input file must be specified when '-term' is specified and '-save' is not.
2170 - An insertion point is out of place.
2174 - An interface module cannot contain any private declarations or rules.
0001 - An internal error has occurred in the Kernel.
2047 - An invalid BREAK-WIDTH value was encountered.
6040 - An invalid BREAK-WIDTH value was encountered.
2048 - An invalid byte ordering was encountered.
3008 - An invalid character representation sequence was encountered.
3027 - An invalid character set was encountered in the current pattern.
3006 - An invalid character was found.
2126 - An invalid combination of tests was encountered in a stream type test.
3018 - An invalid format item was found in a name.
2081 - An invalid ITEM selector value was encountered.
3031 - An invalid modifier and format item combination was encountered.
3009 - An invalid modifier value was encountered.
3010 - An invalid number was encountered.
2073 - An invalid replacement character was encountered.
2080 - An invalid shelf size was encountered.
2085 - An invalid stream modifier was encountered.
2503 - An obsolete keyword was detected.
2093 - An operation that is not yet supported was encountered.
0245 - An undeclared SHORTREF map name must not be used in a USEMAP declaration.
0265 - An undeclared SHORTREF map name must not be used in a USEMAP declaration.
0025 - An undefined general entity has been referenced or used as an attribute value. The DEFAULT general entity is used for its value.
0026 - An undefined general entity has been used as a default attribute value, and the attribute value has been allowed to default in a start tag.
2094 - An undefined macro parameter was encountered in a '%@(...)' format.
2097 - An undefined pattern variable was encountered.
6142 - An uninitialized MARKUP EVENT instance has been passed to the markup processor.
0303 - An XML attribute name should only be defined once in an ATTLIST declaration.
 N/A - Arguments file ended inside a string.
6119 - Attempted a non-catchable throw.
6126 - Attempted to read a closed input source.
6125 - Attempted to read/scan unattached #current-input.
6128 - Attempted to return multiple times from a non-void returning function.
6136 - Attempting a markup parse in a context that can write to a Markup Parser or handle Markup Errors.
6114 - Attempting an output operation while #CURRENT-OUTPUT is unattached.
6107 - Attempting an SGML-PARSE action specifying an element that is not declared in the current SGML DTD.
6105 - Attempting an SGML-PARSE action using CURRENT DTD in a context where no DTD is active.
6106 - Attempting an SGML-PARSE action using SUBDOCUMENT in a context where there is no previous SGML-PARSE.
6111 - Attempting an XML-PARSE action specifying an element that is not declared in the current XML DTD.
6110 - Attempting an XML-PARSE action using CURRENT DTD in a context where no DTD is active.
6037 - Attempting to access #IMPLIED attribute value.
2165 - Attempting to access a field of a non-record value.
6052 - Attempting to access a shelf item with an unknown key.
6058 - Attempting to access an optional function argument that wasn't specified.
2041 - Attempting to access external information about an internal function.
2017 - Attempting to access external information about an undeclared function.
6059 - Attempting to access the contents of an open stream.
6115 - Attempting to add the unattached #CURRENT-OUTPUT to the current active stream set.
6113 - Attempting to carry out an action that is not allowed in the current context.
6007 - Attempting to clear a shelf being used in a repeat over.
6008 - Attempting to close/discard an active stream.
6100 - Attempting to convert a zero length string into a numeric value.
7001 - Attempting to convert an out-of-range value to Roman numerals.
6076 - Attempting to copy a shelf too large for the target shelf.
6011 - Attempting to copy a smaller sized shelf to a larger sized shelf which is being used in a repeat over action.
6080 - Attempting to copy a stream which is not attached to a buffer.
6082 - Attempting to copy a stream which is open.
6033 - Attempting to copy a wrong sized shelf to a fixed sized shelf.
6065 - Attempting to copy/save a referents-allowed buffer stream opened in an outer nested-referents scope.
 N/A - Attempting to define log file multiple times.
 N/A - Attempting to define '-of' or '-aof' file multiple times.
6021 - Attempting to define shelf item with a key already associated with the shelf.
4006 - Attempting to divide by zero.
6013 - Attempting to enlarge a shelf past its maximum size.
6054 - Attempting to evaluate a non-numeric string as a number.
2072 - Attempting to evaluate a referent immediately.
4007 - Attempting to evaluate the remainder by dividing by zero.
6079 - Attempting to fetch name of either an unattached stream, a stream attached to a buffer or a stream attached to standard out.
6116 - Attempting to flush an unattached stream.
6034 - Attempting to initialize a shelf of fixed size greater than 1.
6039 - Attempting to insert into a shelf being used in a repeat over, an item which is less than or equal to the size of the shelf at the start of the repeat over.
6020 - Attempting to interfere with another domain's stream.
5004 - Attempting to load a corrupted saved application.
6035 - Attempting to modify a fixed size shelf.
 101 - Attempting to open a file with zero length name.
6069 - Attempting to OPEN/REOPEN a stream with a referent which is already in use.
6022 - Attempting to process content twice in one rule.
6129 - Attempting to redefine a dtd shelf item that is currently in use.
6072 - Attempting to remove from a shelf being used in a repeat over, an item which is less than or equal to the size of the shelf at the start of the repeat over.
6067 - Attempting to reopen an unattached stream.
6075 - Attempting to restore a saved shelf which is saved in rules that are not properly nested with respect to each other.
6081 - Attempting to save a stream which is not attached to a buffer.
6083 - Attempting to save a stream which is open.
7002 - Attempting to select multiple declarations or rules.
6078 - Attempting to skip past a negative number of characters.
6003 - Attempting to use a number base value that is either less than 2 or greater than 36.
6086 - Attempting to use a referent that does not exist.
6095 - Attempting to use a referent value which is not fully resolved.
6071 - Attempting to use a referent with zero length name.
6087 - Attempting to use an existing referent with no defined value in the current nested-referents scope.
6061 - Attempting to use an unspecified pattern variable.
6048 - Attempting to use current element but none exists.
6049 - Attempting to use current entity but none exists.
6001 - Attempting to use out-of-range attribute item selector.
6070 - Attempting to use out-of-range referent item selector.
6077 - Attempting to use out-of-range shelf item selector.
6109 - Attempting to use submit in a MARKUP-ERROR rule.
6015 - Attempting to use unknown date format operator.
6060 - Attempting to write a referent to a stream which does not allow referents.
6120 - Attempting to write to a stream that is no longer in scope.
6090 - Attribute is not declared for the element or entity.
6147 - Attribute is not specified for the element.
6002 - Attribute type mismatch.
6055 - Attribute value is not an external entity.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

7008 - Built-in stream modifier conflict.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

5001 - Cannot create a temporary file, check directory and write permissions.
6042 - Cannot directly reference #MAIN-INPUT in this context.
6064 - Cannot directly reference #PROCESS-INPUT in this context.
6097 - Cannot output to stream 'X'.
6066 - Cannot reopen an active stream.
0023 - CONCUR YES should not be specified in the SGML Declaration, as it is not supported by the system.
 N/A - Conflicting control arguments: -library, -save.
 N/A - Conflicting control arguments: -load, -s.
 N/A - Conflicting control arguments: -load, -save.
 N/A - Conflicting control arguments: -term, -s.
 N/A - Conflicting input and output file specification.
2143 - Conflicting USE declarations.
6062 - Content of current rule was not fully processed.
 N/A - Control argument requires a single argument.
 N/A - Control argument requires two arguments.
2135 - Current token is unexpected.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

0029 - Data cannot be allowed at the current point, and will be treated as if it were part of an IGNORE marked section.
0028 - Data is not normally allowed at the current point, but will be allowed through error recovery.
0024 - DATATAG YES should not be specified in the SGML Declaration, as it is not supported by the system.
6016 - Date format string ends prematurely.
2502 - Dead code was detected.
2011 - Declaration condition conflict.
2012 - Declaration not allowed.
6014 - Detected a referent loop: referent is directly or indirectly written to itself.
2018 - Duplicate binary declaration encountered.
2014 - Duplicate catch declaration for catch 'X'.
2092 - Duplicate declaration encountered.
 N/A - Duplicate file error.
2007 - Duplicate macro name encountered.
2095 - Duplicate pattern variable encountered.
2076 - Duplicate SAVE action encountered.
2523 - Duplicate share name encountered.
 N/A - Duplicate stream conflict.
2022 - Duplicate stream modifier encountered.
2506 - Duplicate test detected.
2507 - Duplicate type in type set.
2508 - Duplicate USING prefix encountered.
6137 - Dynamic cast failed.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

2034 - ELEMENT rule condition conflict.
2037 - Encountered a duplicate catch parameter.
2021 - Encountered a duplicate function parameter.
7003 - Encountered a format item to stop hiding text, but text was not being hidden.
2030 - Encountered a function that was never defined.
2009 - Encountered a keyword or format item that is not allowed in the current context.
2163 - Encountered a record with an incomplete type declaration.
2164 - Encountered a record with an invalid type declaration.
0284 - Encountered a type of declaration either not allowed in XML, or not allowed in the current context.
2102 - Encountered an attempt to save a local shelf or function parameter.
2078 - Encountered an invalid shelf index.
2124 - Encountered end of file while matching a built-in macro.
2023 - End of file in macro parameter encountered.
3004 - End of file in the current string encountered.
2137 - Error attempting value conversion.
3020 - Error detected while reading a file.
3025 - Error detected while writing to a file.
 N/A - Error encountered while opening library file.
 N/A - Error while reading arguments file.
 N/A - Error while trying to authorize the program (Code = X).
7006 - Exceeded maximum line BREAK-WIDTH.
2055 - EXIT action out of place.
0078 - EXPLICIT YES should not be specified in the SGML Declaration, as it is not supported by the system.
6026 - External data entity notation's PUBLIC identifier not given in LIBRARY declaration.
6032 - External entity's PUBLIC identifier not given in LIBRARY declaration.
 206 - External function requires return value, but none was set.
5006 - External function returned failure.
5008 - External function returned with one or more uncaught throws.
2074 - External functions are not supported on this platform.
 212 - External library 'X' is built with a different external API version
 213 - External MARKUP SOURCE function has not supplied all required parsing methods.
 200 - External stream HasName subfunction returned failure.
2104 - EXTERNAL-ENTITY rule condition conflict.
0161 - Extra "//" sequences must not be present in a formal public identifier, beyond those allowed.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

 201 - Failed to load library 'X'
 208 - Fatal error in initialization function omxf_start of library 'X'
3037 - Feature not supported for this version.
0253 - For every value specified for an IDREF attribute, there must be an element with the value specified for its ID attribute.
2020 - Function already defined.
2083 - Function call not allowed.
2149 - Function definition mismatch.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

0283 - General entity reference must be a declared general entity or one of the pre-defined character escapes.
0244 - General entity reference must be a declared general entity or there must be DEFAULT entity.
2531 - GROUP declarations do not affect MARKUP-ERROR rules. Consider moving the rule into GROUP #IMPLIED.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

0159 - If a formal public identifier contains a "public display version" then the public text class must not be one of CAPACITY, CHARSET, NOTATION or SYNTAX.
0160 - If a formal public identifier's text class is not CHARSET, it must contain a "public text language" that is a valid name.
0132 - If a rank stem is specified in a start tag, a previous start tag must establish the current rank for that stem.
0139 - If an element has both NOTATION and CONREF attributes, both of them must not be specified in a start tag.
0134 - If an MSOCHAR is defined in the SGML Declaration, an MSICHAR must also be defined.
0167 - If SCOPE INSTANCE is specified in the SGML Declaration, all specified quantities must be at least as great as the reference quantity set value.
0225 - If SCOPE INSTANCE is specified in the SGML Declaration, the syntax-reference character set must match that in the Reference Concrete Syntax.
0223 - If SUBDOC is NO, an entity must not be declared with type SUBDOC.
0227 - If the type of a non-CDATA attribute only allows one value, it must be specified with only one value.
2534 - Ignorable format item encountered.
2158 - Illegal base element name.
6139 - Illegal base element name.
2159 - Illegal modifier in markup query.
2000 - Illegal source operation.
2521 - Implicit format item modifier added.
0087 - IMPLICIT YES should not be specified in the SGML Declaration, as it is not supported by the system.
6098 - Improper nesting of referent scopes.
0165 - In a notation declaration, the text class of a formal public identifier must be NOTATION.
0261 - In a start tag, a previously unspecified CURRENT attribute must be given a value.
0259 - In a start tag or ENTITY declaration, every required attribute must be given a value.
0260 - In a start-tag or ENTITY declaration, every CURRENT, FIXED or default valued attribute must be specified if both SHORTTAG and OMITTAG are NO.
0054 - In the declaration of a parameter entity with an external identifier, the entity type must not be CDATA, SDATA, NDATA or SUBDOC.
0055 - In the declaration of a parameter entity with text, the entity type must not be CDATA or SDATA.
0280 - In the head of a marked section, a keyword must be CDATA.
0256 - In the head of a marked section, a keyword must be one of TEMP, INCLUDE, IGNORE, CDATA or RCDATA.
0302 - In XML, the replacement text of any entity referred to directly or indirectly in an attribute value must not contain a "<".
2058 - Incorrect context for indexing into a shelf.
2025 - Incorrect number of actual parameters in function call.
7000 - Input source modifier conflict.
3000 - Insufficient memory.
2008 - Invalid argument for a shelf-modifying action.
7005 - Invalid argument to the TEST-SYSTEM action encountered.
6056 - Invalid attempt to initialize a shelf from the command line (either its initial size > 1 or it is predefined).
6150 - Invalid attribute declaration.
6149 - Invalid attribute specification.
2122 - Invalid catch definition.
3026 - Invalid character found in a based number.
 N/A - Invalid character in arguments file.
2198 - Invalid CONSTANT dereference encountered.
2079 - Invalid COPY action encountered.
2169 - Invalid dynamic cast.
2005 - Invalid function definition.
2177 - Invalid import.
2061 - Invalid list of groups encountered.
3032 - Invalid numeric conversion of a string attempted.
4005 - Invalid occurrence count encountered.
2172 - Invalid opaque type declaration.
2056 - Invalid operation on a fixed-size shelf encountered.
2044 - Invalid operation on a variable-size shelf encountered.
2070 - Invalid pattern.
2069 - Invalid qualifier sequence encountered.
2071 - Invalid radix encountered.
2077 - Invalid shelf declaration encountered.
3029 - Invalid string encountered in LETTERS declaration.
 N/A - Invalid text in library file. Only LIBRARY and INCLUDE declarations are allowed.
2195 - Invalid type instance for VOID.
2084 - Invalid use of #OUTPUT in current stream group encountered.
2057 - Invalid use of groups encountered.
2118 - Invalid use of the string continuation character ('_').
2182 - Invalid USING prefix encountered.
6093 - Invocation of program tries to activate a switch which was not defined as a global in the program.
6092 - Invocation of program tries to initialize a counter which was not defined as a global in the program.
6091 - Invocation of program tries to use a stream which was not defined as a global in the program.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

2026 - Keyword is in use.
2052 - Keyword is unavailable.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

0096 - LINK declarations are not supported by the system.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

0035 - Marked section declaration encountered at a point where one isn't allowed.
0145 - Minimization must not be omitted in an element declaration when OMITTAG is YES.
2146 - Mismatch between require and supply.
4000 - Missing or invalid format item.
 N/A - Missing -s or -load control argument.
2147 - Missing supply in an import statement.
2140 - Module declaration not permitted.
2015 - Multiple catch block for catch 'X' in one local scope.
 N/A - Multiple source control arguments specified, using either '-s' or '-source'.
 N/A - Multiple '-term' control arguments specified.
0189 - Multiple use of delimiter string in SHORTREF declaration.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

2184 - Name is in use.
3013 - Name is too large.
6124 - No catch #external-exception was available for this exception.
 210 - No external function name has been specified
 209 - No external library name has been specified
6046 - No item phrase supplied for list-valued attribute.
6047 - No matching ELEMENT rules selectable.
 211 - No OMXF_Library_API_Version function exists in library 'X'
2511 - No PROCESS-START, PROCESS, or PROCESS-END rules were specified, so no action will be taken.
6024 - No PUBLIC identifier declared for external data-entity's notation.
6030 - No PUBLIC identifier declared for external entity.
6135 - No selectable rules.
6025 - No SYSTEM identifier declared for external data-entity's notation.
6031 - No SYSTEM identifier declared for external entity.
 N/A - Non-numeric value supplied to -limit control argument.
3017 - Number is too large.
6073 - Numeric operand of REPEATED must be greater than or equal to 0.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

2505 - Obsolete syntax was detected.
1001 - OmniMark has detected a fatal error using an operating system call.
0266 - One of the allowed values of a notation attribute is not the name of a declared notation.
0282 - Only a limited set of characters is allowed in a PUBLIC identifier.
2065 - Opaque type already declared.
2133 - Operator precedence too low for current context.
2134 - Operator type mismatch.
2004 - Optional function arguments are ambiguous.
6123 - OUTPUT-TO cannot be used to change the destination of a MARKUP SOURCE or STRING SOURCE function.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

2520 - Part of a sub-pattern will never be matched.
2516 - Possible empty pattern encountered.
2522 - Program may suspend indefinitely.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

6053 - Reached the end of the current function without returning a value.
0257 - Recognized a delimiter or data not allowed in the current context.
2514 - Redundant declarations were detected.
2532 - Redundant format item encountered.
2526 - Redundant stream modifier encountered.
2153 - Require not allowed.
2154 - Required function declared as EXTERNAL.
2040 - RETHROW action out of place.
2128 - Return action out of place.
2517 - Risky code was detected.
2038 - Rule header condition conflict.
2100 - Rule not allowed.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

7900 - Same stream given more than once in PUT/OUTPUT-TO action.
2106 - Several consecutive conditions were found.
2524 - Shelf query result is invariant.
6088 - Silent referent is written to a stream having no referent defaults.
0220 - SIMPLE YES should not be specified in the SGML Declaration, as it is not supported by the system.
6045 - Specified binary ordering selector is negative.
 N/A - Specified '-linger' time in seconds must be > 1.
6057 - Specified number is too big to be converted.
6005 - Specified stream is not attached to a buffer or referent.
6084 - Specified string cannot be converted into a number.
6004 - Specified string too large for binary conversion.
2525 - Stream test result is invariant.
3022 - String is too large.
2144 - Supply declaration error.
2148 - Supply is not required.
4001 - SYMBOL declaration missing.
3023 - Syntax Error.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

2001 - The current action is not allowed in the current rule.
2116 - The current action is not allowed in the current translation-type.
2051 - The current action is not allowed on a constant parameter.
2003 - The current action may not be reachable because of preceding RETURN actions.
6131 - The current 'drop' expression failed to match its pattern.
2530 - The CURRENT ELEMENTS pseudo-shelf is guaranteed to be empty in this context.
2513 - The current macro may not have an ending.
6006 - The current pattern contains an invalid occurrence count.
3002 - The current set of modifiers is invalid.
3014 - The current string does not end on the current line.
6132 - The current TAKE expression failed to match its pattern.
2031 - The current value-returning function never returns.
0037 - The declared value of a NOTATION data attribute must not be either CURRENT or CONREF.
0092 - The declared value of a notation data attribute must not be ENTITY, ENTITIES, ID, IDREF, IDREFS, or NOTATION.
0036 - The declared value of an ID attribute must be either REQUIRED or IMPLIED.
0181 - The default general entity has been declared more than once.
0250 - The default value of a notation attribute is not the name of a declared notation.
0249 - The default value of a notation attribute used in a start tag must be the name of a declared notation.
0243 - The default value of an entity attribute has not been defined. If there is a default general entity, its value will be used as that of the named entity. If there is no default general entity, any attempt to use this default value will result in an error.
0242 - The default value of an ENTITY attribute must have been defined in the DTD if the default value is used in a start tag.
0131 - The DOCTYPE name must be declared in an ELEMENT declaration in the DTD.
0077 - The document instance must consist of at least one tag or data character.
0041 - The document must not end at this point.
0233 - The document must not end inside the DTD.
6151 - The DTD instance has not been fully parsed and cannot be inspected.
0114 - The element name in a end tag must be one of those declared in the DTD. The name in the tag has not been declared, but is close in its spelling to a declared element's name. That element has been used.
0113 - The element name in a start tag must be one of those declared in the DTD. The name in the tag has not been declared, but is close in its spelling to a declared element's name. That element has been used.
0027 - The end of a declaration has been encountered before the declaration has been completed. Either the delimiter that ends the declaration (MDC) was encountered when something else was expected, or the ending delimiter was missing and another declaration was encountered.
0254 - The end of the SGML document or SGML subdocument must not occur in the middle of markup.
0278 - The end of the XML document must not occur in the middle of markup.
2535 - The 'ESCAPE' declaration is deprecated.
2171 - The 'FILE' keyword is required in this context, when the attachment is a file.
0058 - The first in a pair of character numbers in the SWITCHES part of the SGML Declaration must not be a Digit, UC Letter or LC Letter, and it must be a markup character.
0105 - The function character names and classes (RE, RS, SPACE, FUNCHAR, SEPCHAR, MSOCHAR, MSICHAR and MSSCHAR) in the FUNCTION part of the SGML Declaration must each be followed by a character number.
2175 - The implementation module doesn't conform to its interface.
2173 - The 'IMPLEMENTS' clause of an implementation module must refer to an interface module.
 N/A - The INCLUDE declaration is missing a string argument.
 N/A - The INCLUDE declaration must be a string argument.
0098 - The input file must not end inside a marked section.
0100 - The keywords CAPACITY SGMLREF in an SGML Declaration must be followed by at least one capacity specification.
0128 - The LCNMCHAR and UCNMCHAR strings in the SGML Declaration must be the same length.
0129 - The LCNMSTRT and UCNMSTRT strings in the SGML Declaration must be the same length.
0226 - The length of the start tag before resolution of references must not exceed TAGLEN.
 N/A - The LIBRARY declaration arguments must be strings.
 N/A - The LIBRARY declaration is missing one or both of its required string arguments.
0073 - The markup document entity must not end inside the SGML Declaration.
6143 - The MARKUP SOURCE being processed is not well-formed.
0217 - The meaning of each significant base character must be assigned to one, and only one, document character in the SGML Declaration.
0218 - The meaning of each significant base character must be assigned to one, and only one, syntax character in the SGML Declaration.
0091 - The minimum literal following the SGML keyword in the SGML Declaration must be "ISO 8879:1986".
0115 - The name in a general entity reference must be one of those declared in the DTD if there is no default general entity. The name in the reference has not been declared, but is close in its spelling to a declared entity's name. That entity has been used.
0116 - The name in a parameter entity reference must be one of those declared in the DTD. The name in the reference has not been declared, but is close in its spelling to a declared entity's name. That entity has been used.
0285 - The name of the thing being declared in the current XML declaration is missing.
0277 - The name specified in an end tag must be that of the innermost opened element.
2504 - The 'NAMECASE' declaration is deprecated. The namecase is now determined by the namecase of the document being parsed.
0085 - The nesting level in the content model of an ELEMENT declaration must not exceed GRPLVL.
0021 - The "NET" delimiter string must not be the same as some other delimiter in the same context.
0124 - The number of characters in a name, number, name token or number token must not exceed NAMELEN.
0126 - The number of characters in a parameter entity name plus the number of characters in the pero ("%") delimiter must not exceed NAMELEN.
0150 - The number of characters in a processing instruction must not exceed PILEN.
0127 - The number of characters in a reserved name must not exceed NAMELEN in the defined syntax.
0125 - The number of characters in the number in a numeric character reference must not exceed NAMELEN.
2155 - The number of declared items is less than the declared shelf size.
0005 - The number of names and name tokens in an attribute list must not exceed ATTCNT.
0083 - The number of names in a name group, name token group or content model must not exceed the GRPCNT quantity limit.
0086 - The number of names in IDREF, IDREFS, ENTITY and ENTITIES attribute values in a start tag, whether specified or defaulted, must not exceed the GRPCNT quantity limit.
0221 - The number of nested elements in the document instance must not exceed TAGLVL.
0097 - The number of nested marked sections must not exceed TAGLVL.
0084 - The number of tokens in a content model must not exceed GRPGTCNT.
0222 - The number used following SUBDOC YES in the SGML Declaration must not be larger than is allowed by the system.
0224 - The number used following SUBDOC YES in the SGML Declaration should not be zero.
 203 - The opaque type creator function returned a null pointer.
0162 - The owner identifier in a formal public identifier must conform to one of the allowed types (ISO, registered or unregistered), and must end with "//".
0147 - The pero delimiter in the variant syntax is longer than or equal in length to NAMELEN. Any attempt to define a parameter entity will result in NAMELEN being exceeded.
2509 - The program contains a predefinition of a function, but not its actual definition.
3007 - The program has exceeded an internal limit of the OmniMark compiler.
6023 - The program has exceeded an internal limit of the OmniMark run-time.
0299 - The prolog of a valid XML document must contain a (valid) DTD.
0133 - The prolog of an SGML document must contain a (valid) DTD.
2054 - The proposed ESCAPE character is invalid because it is not a valid string character.
0166 - The public text description in a formal public identifier must be followed by "//".
5003 - The referent resolution file is corrupted.
0206 - The replacement defined for a reserved name in the reserved name use parameter of the SGML Declaration must not be reference reserved name.
0064 - The replacement defined for a reserved name the SGML Declaration must not be the same as a previous replacement for a reserved name.
0090 - The replacement for an entity, referenced in a group, must consist of one or more complete tokens.
0067 - The second character number in a pair of numbers in the character switches in the SGML Declaration must not have already been used a substitute.
0059 - The second in a pair of character numbers in the SWITCHES part of the SGML Declaration must not be a Digit, UC Letter or LC Letter.
0300 - The sequence "--" is not allowed in a comment in XML.
0108 - The SHUNCHAR keyword in the SGML Declaration must be followed by the keyword NONE, by the keyword CONTROLS or by at least one character number to be shunned.
0164 - The special form of ISO owner identifier must not be used in a formal public identifier if the text class is not CHARSET.
0106 - The start tag of an element that has one or more required attributes must not be omitted.
0102 - The start tag of an element with CDATA, RCDATA or EMPTY content must not be omitted.
0110 - The start tag of an element with no content must not be omitted.
6138 - The stream attachment cannot be reopened.
0111 - The SWITCHES keyword in the SGML Declaration must be followed by zero or more pairs of character numbers to be switched.
0156 - The text class of a formal public identifier used in a base character set parameter of the SGML Declaration must be CHARSET if FORMAL YES is specified.
0157 - The text class of a formal public identifier used in the capacity set parameter of the SGML Declaration must be CAPACITY if FORMAL YES is specified.
0158 - The text class of a formal public identifier used in the concrete syntax parameter of the SGML Declaration must be SYNTAX if FORMAL YES is specified.
0094 - The total length of a literal after processing must not exceed LITLEN.
0095 - The total length of a public identifier after processing must not exceed the reference value of LITLEN.
0007 - The total length of all attributes specified in a start tag after processing must not exceed ATTSPLEN.
0076 - The total number of opened entities must not exceed ENTLVL.
6148 - The value of #CURRENT-DTD cannot be used to parse the markup document instance.
0228 - The value of TOTALCAP in the capacity set parameter of the SGML Declaration must equal or exceed the largest individual capacity.
2082 - The value to skip past by must be positive.
0010 - There is an error in the format of an externally defined capacity set used in the SGML Declaration.
0015 - There is an error in the format of an externally defined character set used in the SGML Declaration.
0263 - There is no element with an IDREF or IDREFS attribute value equal to a specified ID value.
0063 - There is some significant character that does not appear in any of the base character sets.
0144 - There must not be a space, separator character or line break immediately preceding an occurrence indicator (SEQ, OR or AND) in a content model.
0143 - There must not be an entity reference immediately preceding an occurrence indicator (OPT, PLUS or REP) in a content model.
0034 - This declaration is not allowed in the current context.
 N/A - This program's license key is incorrect.
2105 - Token is too large.
2098 - Too many files have been included without being closed.
6145 - Trying to access an instance of an abstract type.
6029 - Trying to access the notation of an external entity which does not have one.
2197 - Trying to create an instance of an abstract type.
6140 - Trying to leave #CURRENT-INPUT of a STRING SINK FUNCTION unconsumed.
6063 - Trying to process content where not permitted.
6068 - Trying to REOPEN stream WITH REFERENTS-ALLOWED, but stream does not currently have REFERENTS-ALLOWED.
0002 - Two or more added function names that are the same when upper-cased must not be used if NAMECASE GENERAL is YES.
2145 - Type mismatch between require and supply.

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

 207 - Unable to bind to function 'X' in library 'Y'
 102 - Unable to close file.
3001 - Unable to close file.
 N/A - Unable to open control arguments file.
 104 - Unable to open file for input.
3019 - Unable to open file for input.
 N/A - Unable to open file for input.
 103 - Unable to open file for output.
3024 - Unable to open file for output.
 N/A - Unable to open file for output.
 N/A - Unable to open library file.
 N/A - Unable to open log file.
 105 - Unable to read from file.
 106 - Unable to write to file.
4004 - Unequal shelf sizes in REPEAT OVER action detected.
 N/A - Unexpected error while trying to authorize the program.
2024 - Unexpected value in macro parameter matching encountered.
3036 - Uninitialized variable was referenced.
7004 - Unknown external data entity.
6051 - Unknown external text entity.
2528 - Unreachable actions.
 N/A - Unrecognized control argument.
2142 - Use declaration error.
6133 - user-defined assertion failed

' A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

 N/A - Warning: attempting to use the same file for input and as the saved application input.
5002 - Write to referent resolution temporary file failed.