swirl
Guide to OmniMark 9   OmniMark home
docs home 
IndexConceptsTasksSyntaxLibrariesLegacy LibrariesErrors
 
     

ommqi IBM MQSeries Object Descriptions

Overview

This page describes the mechanism for representing IBM MQSeries structures in the OmniMark MQSeries interface.

For further documentation on the meanings of the structure fields and on their use please see the documentation that came with IBM MQSeries.

Each MQSeries structure that is supported in the OmniMark interface is listed below. Each subsection has the following form:

  1. A subsection title which names the OmniMark opaque object that is used to encapsulate an MQSeries structure
  2. A short description which lists the getter and setter functions for the OmniMark opaque as well as what MQSeries structure this opaque encapsulates
  3. A list of fields, which version of the MQSeries structure they correspond to and whether the field is writable or only readable
  4. Any special notes on that particular structure

Getter functions take an OmniMark MQSeries opaque and a modifiable shelf. The getter function populates the shelf with key {field} and the field value for each field that has a version less than or equal to the opaque's current version. That is, if the structure has a current version of 2 then only fields which have a version of 1 or 2 will be returned from this function.

Setter functions take an OmniMark MQSeries opaque and a read-only shelf. The read-only shelf must be set up to have keys which match the fields that will be set, and the corresponding values that they will be set to. Any fields which are omitted will be left unchanged. It is an error to try to set a field whose version is greater than the current version of the opaque object.

mq-connection-options

This object encapsulates the MQSeries MQCNO object. The getter for mq-connection-options is mq-get-connection-options and the setter is mq-set-connection-options.

Fields accessible in the MQSeries MQCNO structure using the mq-connection-options getter and setter functions:

  Field               version    Settable 
          StrucId                1          no    
          Version                1          yes    
          Options                1          yes    
          ClientConnPtr          2          yes *

* The ClientConnPtr is only indirectly settable by calling the mq-set-mqcd-of-mqcno function and gettable using the mq-get-mqcd-of-mqcno function.

mq-get-message-options

This object encapsulates the MQSeries MQGMO object. The getter for mq-get-message-options is mq-get-get-message-options and the setter is mq-set-get-message-options.

Fields accessible in the MQSeries MQGMO structure using the mq-get-message-options getter and setter functions:

  Field               version    Settable 
          StrucId                1          no    
          Version                1          yes    
          Options                1          yes    
          WaitInterval           1          yes    
          Signal1                1          yes    
          Signal2                1          yes    
          ResolvedQName          1          no    
          MatchOptions           2          yes    
          GroupStatus            2          no    
          SegmentStatus          2          no    
          Segmentation           2          no    
          MsgToken               3          yes    
          ReturnedLength         3          no

mq-message-descriptor

This object encapsulates the MQSeries MQMD object. The getter for mq-message-descriptor is mq-get-message-descriptor and the setter is mq-set-message-descriptor.

Fields accessible in the MQSeries MQMD structure using the mq-message-descriptor getter and setter functions:

  Field               version    Settable 
          StrucId                1          no    
          Version                1          yes    
          Report                 1          yes    
          MsgType                1          yes    
          Expiry                 1          yes    
          Feedback               1          yes    
          Encoding               1          yes    
          CodedCharSetId         1          yes    
          Format                 1          yes    
          Priority               1          yes    
          Persistence            1          yes    
          MsgId                  1          yes    
          CorrelId               1          yes    
          BackoutCount           1          no    
          ReplyToQ               1          yes    
          ReplyToQMgr            1          yes    
          UserIdentifier         1          yes    
          AccountingToken        1          yes    
          ApplIdentityData       1          yes    
          PutApplType            1          yes    
          PutApplName            1          yes    
          PutDate                1          yes    
          PutTime                1          yes    
          ApplOriginData         1          yes    
          GroupId                2          yes    
          MsgSeqNumber           2          yes    
          Offset                 2          yes    
          MsgFlags               2          yes    
          OriginalLength         2          yes

mq-object-descriptor

This object encapsulates the MQSeries MQOD object. The getter for mq-object-descriptor is mq-get-object-descriptor and the setter is mq-set-object-descriptor.

Fields accessible in the MQSeries MQOD structure using the mq-object-descriptor getter and setter functions:

  Field               version    Settable 
          StrucId                1          no    
          Version                1          yes    
          ObjectType             1          yes    
          ObjectName             1          yes    
          ObjectQMgrName         1          yes    
          DynamicQName           1          yes    
          AlternateUserId        1          yes    
          RecsPresent            2          no    
          KnownDestCount         2          no    
          UnknownDestCount       2          no    
          InvalidDestCount       2          no    
          ObjectRecPtr           2          yes *    
          ResponseRecPtr         2          no    
          AlternateSecurityId    3          yes    
          ResolvedQName          3          no    
          ResolvedQMgrName       3          no

* The ObjectRecPtr is settable via the mq-set-mqor-of-mqod function and gettable via the mq-get-mqor-of-mqod function Both of these functions work with shelves of mq-object-descriptor objects.

For more information about getting values from the ResponseRecPtr see the Error Handling Document.

mq-object-record

This object encapsulates the MQSeries MQOR object. The getter for mq-object-record is mq-get-object-record and the setter is mq-set-object-record.

Fields accessible in the MQSeries MQOR structure using the mq-object-record getter and setter functions:

  Field               version    Settable 
          ObjectName             1          yes    
          ObjectQMgrName         1          yes

This is not a versioned structure as there is no version field.

mq-put-message-options

This object encapsulates the MQSeries MQPMO object. The getter for mq-put-message-options is mq-get-put-message-options and the setter is mq-set-put-message-options.

Fields accessible in the MQSeries MQPMO structure using the mq-put-message-options getter and setter functions:

  Field               version    Settable 
          StrucId                1          no    
          Version                1          yes    
          Options                1          yes    
          KnownDestCount         1          no    
          UnknownDestCount       1          no    
          InvalidDestCount       1          no    
          ResolvedQName          1          no    
          ResolvedQMgrName       1          no

mq-response-record

This object encapsulates the MQSeries MQRR object. The getter for the mq-response-record is mq-get-response-record.

Fields accessible in the MQSeries MQRR structure using the mq-response-record getter function.

  Field               version    Settable 
          CompCode               1          no    
          Reason                 1          no

As with the mq-object-descriptor, this is not a properly versioned structure. Also note that the fields are both integer values and therefore the type of shelf passed must be an integer shelf.

mq-connection-descriptor

This object encapsulates the MQSeries MQCD object. The getter for mq-connection-descriptor is mq-get-connection-descriptor and the setter is mq-set-connection-descriptor.

Fields accessible in the MQSeries MQCD structure using the mq-connection-descriptor getter and setter functions:

  Field               version    Settable 
          ChannelName            1          yes    
          Version                1          yes    
          ChannelType            1          yes    
          TransportType          1          yes    
          Desc                   1          yes    
          QMgrName               1          yes    
          XmitQName              1          yes    
          ShortConnectionName    1          yes    
          ModeName               1          yes    
          TpName                 1          yes    
          BatchSize              1          yes    
          DiscInterval           1          yes    
          ShortRetryCount        1          yes    
          ShortRetryInterval     1          yes    
          LongRetryCount         1          yes    
          LongRetryInterval      1          yes    
          SeqNumberWrap          1          yes    
          MaxMsgLength           1          yes    
          PutAuthority           1          yes    
          DataConversion         1          yes    
          UserIdentifier         2          yes    
          Password               2          yes    
          MCAUserIdentifier      2          yes    
          MCAType                2          yes    
          ConnectionName         2          yes    
          MsgRetryCount          3          yes    
          MsgRetryInterval       3          yes    
          HeartbeatInterval      4          yes    
          BatchInterval          4          yes    
          NonPersistentMsgSpeed  4          yes    
          NetworkPriority        5          yes    
          LongMCAUserIdPtr       6          yes    
          LongRemoteUserIdPtr    6          yes    
          MCASecurityId          6          yes    
          RemoteSecurityId       6          yes

     
 

Top [ INDEX ] [ CONCEPTS ] [ TASKS ] [ SYNTAX ] [ LIBRARIES ] [ LEGACY LIBRARIES ] [ ERRORS ]

OmniMark 9.1.0 Documentation Generated: September 2, 2010 at 1:35:14 pm
If you have any comments about this section of the documentation, please use this form.

Copyright © Stilo International plc, 1988-2010.